How to solve the clogging problem of atomizing micro nozzles

In the irrigation system, atomizing micro-sprinklers play a key role, but the clogging problem is a common problem. Clogging can cause poor or stopped water spraying, affecting the irrigation effect. Therefore, timely and effective solution to the clogging problem of atomizing micro-sprinklers is essential to maintain the normal operation of the irrigation system.

The main cause of clogging is the entry of suspended particles, silt, scale and other impurities in the water into the micropores of the sprinkler. In addition, long-term use or poor water quality can also cause clogging problems.

To prevent and solve the clogging problem, regular cleaning is an effective method. The sprinkler can be disassembled regularly and rinsed with clean water to remove internal impurities and scale. For severe clogging, a soft brush or special cleaning tool can be used to clean the micropores.

Installing a filter is another important measure to effectively filter impurities and particles in the water and reduce the occurrence of clogging. Choose a filter that is suitable for water quality and working conditions, and clean and replace it regularly.

It is also important to check the water quality of the water source. If the water quality is poor and contains silt or impurities, consider water quality treatment or choose a sprinkler model that is suitable for the water quality.

If cleaning and maintenance cannot solve the clogging problem, the sprinkler may be damaged or aged. Replacing damaged nozzles in time can effectively solve the blockage problem and ensure the normal operation of the system.

Properly adjusting the water pressure can also reduce the occurrence of blockage. Excessive water pressure can easily cause micropores to break or clog, so the water pressure needs to be adjusted according to the actual situation to keep it within the appropriate range.