EZGATION will exhibit at Growtech Antalya 2026 from 24 to 27 November at the ANFAŞ Expo Center in Antalya, Türkiye. The company will be at Hall 5, Stand 5-B171 with inverted micro sprinklers, impact sprinklers, PE mini valves and screen filters, and is using the show to appoint distributors across Europe, the Middle East and Africa. Meetings can be booked in advance at info@ezgation.com.
What EZGATION is bringing to Stand 5-B171
Four lines from a 62-product catalogue, one for each job in a working watering circuit: overhead emission under cover, coverage in the field, zone control on the pipe run, and filtration upstream of both. Buyers who build systems specify by function first and brand second — so the stand is organised the same way.
Inverted Rotating Micro Sprinkler (1101A–1107A)

The line most closely matched to Antalya’s greenhouse belt. It hangs upside down above the crop, with a weighted hammer holding the nozzle vertically so the spray pattern does not drift over a season. Seven colour-coded nozzle sizes cover 22.8 to 216.7 L/h with a spray radius of 3.0 to 4.8 m at 0.15–0.30 MPa, on a 6 mm inner conic connection.
Two operating notes that matter on site: uniformity holds up best from 200 kPa upward, and the optional anti-drip valve stops the line emptying onto the crop when the zone closes — the difference between a clean stop and a wet patch under every sprinkler.
1/2-Inch Plastic Impact Sprinkler (5022 series)

Full-circle impact head on a 1/2″ male thread, delivering 0.34 to 1.01 m³/h and a 9.5 to 11.5 m radius at 200–300 kPa. Six colour-coded nozzles from 2.5 to 4.0 mm, single or double nozzle versions, and adjustable rocker-spring tension for spray accuracy.
Colour-coded nozzles are not cosmetic: a crew can change flow rate in the field without a gauge or a catalogue. The arm and bearing parts detach for maintenance, which is what keeps a €2 head from becoming a replaced-pipeline problem.
PE Mini Valve, 12mm,16mm,20mm,25mm,3/4″ and 1/2″

The part that turns a pipe run into zones. 3/4″ and 1/2″ port sizes for PE pipe and drip tape, manual on-off, sized to sit alongside the sprinkler and dripper lines distributors already stock rather than replacing them. Small ticket, but it is the switch every greenhouse block needs at least one of.
Specifications at a glance
| Product | Flow | Radius / filtration | Pressure | Connection |
|---|---|---|---|---|
| Inverted Rotating Micro Sprinkler 1101A–1107A | 22.8–216.7 L/h | 3.0–4.8 m | 0.15–0.30 MPa | 6 mm inner conic |
| 1/2″ Plastic Impact Sprinkler 5022 | 0.34–1.01 m³/h | 9.5–11.5 m | 200–300 kPa | 1/2″ male thread |
| PE Mini Valve | — | — | — | 3/4″, 1/2″ for PE pipe & drip tape |
Full specifications, drawings and packing data are available on request. Bring a model number or a competitor sample to the stand and the team will match it.
Who we want to meet: distributors in Europe, the Middle East and Africa
EZGATION sells factory-direct from Ningbo, China, and does not currently have a distributor in Türkiye. Growtech is where that changes — and the same conversations apply to partners in Spain, Italy, Greece and the Balkans, the Gulf, North Africa and Sub-Saharan Africa.
The profile we are looking for:
- Irrigation distributors and wholesalers already carrying PE pipe, drippers or filters, who want a second source for sprinklers and fittings without adding a second supplier relationship.
- Greenhouse contractors and turnkey project companies who specify components per project and need the same specs to hold across repeat builds.
- Private-label and OEM buyers who want their own packaging, logo and colour combinations on micro sprinklers and accessories.
What the partnership includes: OEM and ODM cooperation with packaging and logo printing, samples in three days, production lead time of 7–15 days, quotation response within two business hours, annual capacity above 8 million pieces, and a quality system certified to ISO 9001:2015 with CE-marked products.
Why Antalya, and why this show
Growtech is the meeting point of the protected-cultivation supply chain, and Antalya sits at the centre of Türkiye’s greenhouse industry. The 2025 edition drew exhibitors from 135 countries and more than 40,000 visitors across 65,000 m², with roughly one in five visitors arriving from outside Türkiye, according to Turkish press reporting of organiser statements.
For a components supplier that arithmetic is the point: the people walking the halls are system builders and distributors who specify nozzles, filters and valves by model number — not end users buying a garden hose. Four days of specification conversations in Antalya are worth more than a month of email.
Where to find us
- Venue: ANFAŞ Expo Center, Antalya, Türkiye
- Dates: 24–27 November 2026
- Stand: Hall 5, Stand 5-B171
- Contact at the show: info@ezgation.com
Samples of every line will be on display at the stand — the full colour-coded nozzle range of the inverted micro sprinkler, the six impact nozzles from 2.5 to 4.0 mm, the PE mini valve in both port sizes and the screen filter housings. Buyers can inspect spray geometry, connection fit and moulding finish at close range before specifying, and compare them against the components already in their catalogue.
No demonstration slots are scheduled: the stand is set up for hands-on inspection and specification, not a stage show. The team will be available for technical, OEM and product-matching discussions throughout the four days.
Book a meeting before the show
Walk-up conversations are welcome, but the four days fill quickly and the technical team’s slots go first. To reserve a time, email info@ezgation.com with:
- Your company and market
- The product lines you are interested in (sprinklers, drip parts, valves, filters, fittings, kits)
- Estimated annual volume, and whether you need OEM packaging
You will get a reply with a proposed slot and a short technical agenda, so the meeting starts from specifications instead of introductions.
Frequently asked questions
When and where is Growtech Antalya 2026? Growtech Antalya 2026 runs from 24 to 27 November 2026 at the ANFAŞ Expo Center in Antalya, Türkiye. It is the 25th edition of the international greenhouse, agricultural technologies and livestock equipment fair.
Which hall and stand is EZGATION on? EZGATION is in Hall 5, Stand 5-B171, for all four days of the show.
What products will EZGATION show at Growtech 2026? Four lines: the Inverted Rotating Micro Sprinkler for overhead greenhouse watering, the 1/2-Inch Plastic Impact Sprinkler for field and orchard coverage, PE Mini Valves in 3/4″ and 1/2″ for zone control, and 2″ and 3″ Screen Filters for filtration. The wider range of drip parts, PE fittings and irrigation kits is available on request.
Can I book a meeting with EZGATION before the exhibition? Yes. Email info@ezgation.com with your company, market, product interest and estimated volume, and a slot will be reserved before the show opens.
Is EZGATION looking for a distributor in Türkiye? Yes. EZGATION does not currently have a Turkish distributor and is appointing one. The company is also recruiting partners in Europe, the Middle East and Africa.
Does EZGATION offer OEM and private-label production? Yes. OEM and ODM cooperation covers custom packaging, logo printing, colour combinations and product combinations. Drawings, samples or application requirements are evaluated for feasibility, tooling, MOQ and lead time before production.
Which certifications do EZGATION products carry? The quality management system is certified to ISO 9001:2015, and products are CE-marked. Product-specific test reports and declarations are available on request.
Can I see samples at the stand, and are there live demonstrations? Samples of all four lines are on display at Hall 5, Stand 5-B171, including the full nozzle range of the inverted micro sprinkler and both port sizes of the PE mini valve. No live demonstration slots are scheduled; the stand is set up for hands-on inspection and technical discussion.
About EZGATION
EZGATION (Ningbo EZ Irrigation Technology Co., Ltd.) is a manufacturer and exporter of irrigation equipment based in Ningbo, China, with more than 20 years of experience in developing and producing micro sprinklers, drip irrigation parts, valves, filters and fittings for greenhouse, nursery, orchard, garden and field irrigation. The company supplies distributors, project buyers and private-label brands worldwide, with OEM and ODM support, annual capacity above 8 million pieces, and products inspected by the MWR Water-Saving Irrigation Equipment Testing Center to its A-level standard.